You can hang the cabinets yourself.
The key is to take the time and review all your work. Your best friend throughout the process is of good quality. Follow the steps in this guide to make sure you hang the cabinets properly.
1. What is the key to making cabinet doors as smooth as possible?
The most important thing is to level and lock the cabinets during installation. Make sure you spend some time during this process. No matter how careful and precise you are, you still need to make final adjustments with the door hinges.
2. The most important tool.
You will need a high quality leveling or leveling laser to properly hang the cabinets. No matter how precise you think you are, you simply can’t “make an eye” for this project.
3. Check your level.
You can’t buy the cheapest level and expect it to do the job. The cheaper the level, the less precise it can be. Make sure the chosen level is of high quality. Take care of your level. The orientation of the aircraft may be damaged if it falls or crashes. Make sure that the screws on the platform (if you have chosen to adjust) are tightened. A good rule of thumb is that the fluid tube should move. Otherwise, level orientation may be disabled.
Make sure your level is revised. To check the level accuracy:
– Place the platform on a flat surface (wall, table, worktop or floor)
– Check the horizontal orientation
– Check the vertical orientation
-To check the orientation, consider the exact position of the leveling bubble
– Turn the plane in the other direction to see if the bubble is in the same place
– To be precise, the leveling bubble must be in the same place
To hang the horizontal cabinets, the height must be decided in advance. Position the line to hang the cabinets. This is a leveling line. Obviously, you need to make sure that this line is completely horizontal.
6. Find those pins.
The holes must be drilled before hanging the furniture. First of all, you have to find everyone on the wall. A good quality prisoner tool will help you in this process. The holes must be drilled in advance through the suspension rail of the cabinet. These holes must face directly on the wall.
7. Positioning the cabinet.
Next, it is necessary to place the cabinet on the wall in its position. For the cabinets to be horizontal, the support bars must be positioned with the cabinets. These poles ensure that the cabinets remain horizontal during the pre-installation process. Once all the cabinets are in place, check again that they are horizontal. You can also place a temporary screw inside the cabinet to hold it in place.
8. Check the level again.
Now it’s time to check the level and thickness of the cabinet again. Place the tray on the edge of the cabinet. Is it completely level? It is also necessary to position the platform in different positions at the front of the cabinet. Are all these vertical positions in the plan? You can use wooden spacers. The wooden dividers can keep the furniture in position to ensure that it is horizontal and with a ramp.
9. Connect the housing.
After checking the level and flexibility of the wardrobe, it’s time to mount the wall to the wall. Use screws or other fasteners. You do not want to perform this step until you are sure that the cabinet is completely horizontal.
10. Repeat this process for all wall cabinets.
Remember that when positioning the base cabinets, wooden partition walls are placed along the wall and floor to ensure that the cabinet is horizontal. The cards must be placed in the slots between the cabinet wall and the back. A good rule of thumb is to place the spacers in each screw. This ensures that the scraper is not twisted.
With all the cabinets connected, it’s time to fine-tune the entire project. Use the door adjustment screw to better align the right doors. Door hinge screws help keep your door from going away.